Thursday, January 23, 2014

Repair Cracked and Chipped Furniture Like a Pro


I hope most of you saw my Goodwill dresser reveal recently. In that post, I talked about how two of the corners of the piece were damaged. It turns out, it wasn't that difficult to fix them. All I needed was some expert advice and a how-to video from home improvement guru, Ron Hazelton.

I followed his video step by step. Check out how it went.

My Goodwill find

Crack #1

Crack #2


I had to purchase some materials, but I am glad I will have them for the future in case I run into another piece that needs some TLC. 

Items I had:
clamps
putty knife
wood glue
WD-40
scrap plywood
utility knife
sandpaper

Items purchased:
dowels

My Home Depot didn't have the Minwax brand of wood filler. I ended up finding it at my local Ace Hardware store. I highly recommend getting this specific brand because it worked great and allows for filing just 30 minutes after application. I also suggest getting a 4 in 1 wood rasp/file to save yourself some money. It has four different file textures on it to shape your corner in stages. Start with the coarsest side and work your way down.  



Here is a shot of getting the wood filler on. You have to work fast with this stuff because it hardens really quickly. You don't want to over work it, and clean your putty knife right away with acetone. I didn't do this the second time and ended up throwing it away because there was no getting the wood filler off once it dried. 

Also, I had nice clamps because my hubby is planning on building me a farm table for my dining room. If you don't have clamps, get some like Ron uses in his video. They are only $.99 at Home Depot.



I apologize for the blurry pictures. My lighting was really bad that day.


Here is corner #1 after cutting it out with my utility knife and filing it down with my 4 in 1 rasp. I finished it off with some 150 then 220 grit sand paper.


Here is corner #2. I had a big chunk of this drawer that I was able to glue back on with wood glue before I added the wood filler.

Completed corner #1

Completed corner #2

The finished piece

Again, thank you to Ron Hazelton, for his easy to follow tutorial. I will never be intimidated by chipped furniture again. What about you? Do you feel more comfortable tackling furniture repair now?


4 comments:

  1. which would not come off by cleaning alone. Good luck if you decide to do your furniture. Take it one piece at a time and leave yourself a few days to allow for breaks and drying Demir Leather
    :

    ReplyDelete
  2. It is nice that I can read these messages.
    Sexy Escort girls

    ReplyDelete
  3. Great article. I learned lot of things. Thanks for sharing. restaurant booth seat repair

    ReplyDelete
  4. I like your post It is very informative post. Thanks for sharing this informative with us .Nice works for Carpenter man,
    Buy Etilaam

    ReplyDelete

09 10